Skip to main content
GullySystem

Fertigation, scouting and spray records for each bay

This log keeps what was done to a crop on the bay it was done to. Each feed, scouting count and spray is entered with its product, and the re-entry and harvest intervals sit beside it. Head growers enter the work, and the card at the bed end no longer has to survive.

What the growing log records per bay

Three kinds of work are written against a bay: feeding, scouting and spraying. Each entry carries a date and the product or count involved. Entries are made by the head grower or a named scout. A replanted bay keeps its past. Four parts follow.

Feeds by bay

A feed entry names the bay, the date and the nutrient mix applied. Feeds read in sequence for the life of the crop. They sit beside issues from the inputs store. Dose rules are set with your grower.

Scouting counts by visit

Scouts note the pest or disease seen, the count for the whole bay and the date of the visit. A rising count shows beside earlier visits. Scouting decides nothing by itself. The grower reads it and chooses.

Product, dose and bay

Each spray entry holds the product, the dose, the bay and the date of application. Nothing about the product waits on a card at the bed end. The entry survives replanting. Proof outlives the crop.

Re-entry and harvest intervals

The re-entry period and the harvest interval are held next to the spray entry. Both sit side by side. The grower reads the interval before the next harvest. Intervals are entered with your head grower, not assumed by the system.

From scouting walk to spray on the bay

This record follows the grower’s round. Scouting comes first, then a decision, and then a spray or feed entered as it is done. Four moments in a greenhouse week show that order, from the first count to the last box. Each one leaves an entry behind.

A scout walks Bay 11

A scout walks the beds of Bay 11, counts the thrips found and enters the figure for the bay under that day’s date. The count sits beside the last visit. Growers read it that afternoon.

A grower decides on a spray

With the count and earlier scouting visits side by side, the head grower decides whether to spray and which product to use. The choice is the grower’s alone. The log shows the history behind it, bay by bay.

A spray is entered as applied

After the spray goes on, the product, dose, bay and time are entered, and the re-entry period is noted. The row stands as the day’s record for that bay. The card is no longer the proof.

A grading lead checks before cutting

Before the next cut, a grading lead opens the bay and reads the harvest interval beside the last spray. The lead sees whether that interval has run its course. A doubt goes to the head grower.

Who writes and who reads the spray log

Writing to the log is narrow, and reading from it is wide on a flower farm. Few people add entries, but four roles rely on what is there.

For head growers

Planning feeds and sprays by bay, entering them and reading intervals before harvest make up the head grower’s work. Each bay’s output is then compared with its planting plan. This role is the main author.

For farm owners

The owner reads sprays and feeds by bay with harvest intervals, mainly to know the record exists when a buyer asks. Doses are not the owner’s to enter. That memory belongs to the farm, not to a card.

Grading and packing leads

A grading lead reads the interval beside the last spray before crews cut a bay. The lead has no reason to edit it and no need to read the dose. The hall gets a shared answer. It is not a verbal one.

Sales and dispatch desk

The desk does not read doses. It sees whether a bay is held back by its harvest interval, which explains why a variety is not yet in the cold room. That saves a phone call to the grower.

Decisions to settle before the log opens

A log is only useful if it is complete, so a few rules go in before the first entry. Agree them with the head grower and whoever sprays. The questions are practical. Answers go in writing.

Who may enter or correct for fertigation scouting and spray log

Decide whether only the head grower enters sprays or a trained sprayer may too. A correction should carry a name and a date. Nobody should overwrite a past entry silently.

What the log leaves out for fertigation scouting and spray log

Pruning and disbudding can be entered against a bay, since the growing records cover them. Settle whether yours are worth the effort. Irrigation timings, weather and hand weeding can stay on paper if they are not read later.

How current crops come across

Bays planted before go-live start with whatever the spray card at the bed end shows. Choose between keying that history in once or beginning from the day the log opens. Starting fresh is clean. Either way, the bay register is loaded first.

Which report matters first for fertigation scouting and spray log

Sprays and feeds by bay with harvest intervals is the first report to read on this feature. Check a bay’s card against it after the first week of entries. Once the two agree, retire the card.

Where growing records pass to other features

This feature depends on the bay register for its bay and on the store for its products. It hands its facts on to harvest and to claims. Five links join it to other work. Each runs a different way through the product, and each is named below.

  • Bays and planting dates come from the bay register
  • Products are issued from the growing inputs store
  • Harvest and grading reads the interval before cutting
  • Buyer claims look back at sprays on the bay
  • Reports list sprays and feeds by bay with intervals

What the spray log does not decide

The log records what was done. It does not recommend a product, work out a dose, or judge whether a residue is acceptable. It does not file anything with an authority. Which records a buyer or authority expects, and what they mean, are questions for the head grower and an adviser. A single bay can still be kept in a notebook.

FAQ

Frequently asked questions

Who enters a spray, the grower or the sprayer?

Whoever the head grower names. Some farms keep entry with the grower alone. Others let a trained sprayer enter and the grower review. The choice is made at set-up and changed later if the routine changes.

What happens to the log when a bay is replanted?

The old block’s feeds, scouting counts and sprays stay readable against the bay and the crop they belonged to. A new planting starts a fresh run of entries. Nothing is deleted with the old crop.

Can scouting counts be compared between visits?

Counts sit beside earlier visits for the same bay, so a rising figure is visible. Action thresholds are not set by the system. Those belong to your grower, who decides when a count means a spray.

Does it tell crews when a bay is safe to cut?

It holds the interval next to each spray entry, and the grower or grading lead reads it. Nothing locks a bay. Whether to cut remains a decision made by a person on the farm, with the record open in front of them.

How are products and intervals loaded at set-up?

Products, re-entry periods and harvest intervals are entered together with your head grower. Bring current spray cards for each bay and the list of products in the store. Bring them early. Which checks a buyer or authority expects is reviewed during implementation.

Where it fits

How this feature fits the system.

Flower Farms and Nursery Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Propagation and nursery lots

Each tray of cuttings takes a lot number tied to its mother plant, and the number follows it through hardening, potting and sale.

Batch and Serial Tracking

Cold room and stock

Boxes are received into the chiller by pallet, released against orders, and the oldest stock of each grade is flagged to ship first.

Stock Tracking and Alerts

Orders, standing buyers and dispatch

A florist’s standing order is filled box by box from the cold room, and any shortfall by grade is shown to the sales desk.

Order Management
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements