Printing set-ups for screen and rotary lots
Printing set-ups hold the screens or rotary sets, the design, the colour sequence and the repeat length for each printing lot. The approved strike-off sits beside them. The dye master, supervisors and marketing all use it. A reprint then starts from what was approved, with no guesswork about which sets or colours were used.
Screens, sets and strike-offs on record
A printing lot is only repeatable if the set-up behind it was written down at the time. That is the rule. Here a design is bound to the screens or rotary sets that carried it, to the order of colours, and to the strike-off the customer signed.
Printing days from strike-off to reprint
Printing work moves between the colour kitchen, the printing table or rotary machine, and the customer’s approval. Each move is a place where a set-up can be misremembered. Its value shows at each of those points. It starts with the strike-off.
Printing roles and what each one reads
One set-up is read by the person who approves colour, the person who runs the machine and the person who deals with the customer. The three questions are different. One page answers each.
Naming and approving print work
Printing records fail when names drift. A design called by three names becomes three set-ups. Agree these points with the dye master and the print supervisor before the first lot, because later changes mean rekeying old records.
Print set-ups beside the other features
Printing is one step on a lot’s route and one kind of batch on the floor. Its set-up links to the colours in the recipe library, to the batch that runs it and to the inspection that finds a print fault. The print record never stands alone. It is part of the lot.
- Lab dip and recipe library supplies the colour recipes
- Process route by lot places printing before finishing
- Machine batches by lot plans the print run
- Dyes, chemicals and utilities books the colour issues
- Inspection, rework and re-dye marks print faults per roll
Where print records stop
This record holds what was fitted and approved. It does not design artwork, engrave screens or separate colours. Nor does it judge whether a strike-off is good enough. That stays with the dye master and the customer. Where the physical screens are stored is a matter for the store. A unit printing a handful of designs can keep a pattern book.
Frequently asked questions
Does it work for both screen and rotary printing?
Screen and rotary work are recorded the same way, with the sets listed against the lot. The fields that matter, such as repeat length, colour order and design reference, apply to either. The house names its own sets.
Can a printed lot go back for correction?
A print fault found at inspection sends the lot back with its cause noted, like any other rework. The set-up stays with the lot, so a correction run uses the same record. The cost follows the cause.
Can we keep an image of the strike-off?
The record holds the strike-off reference beside the set-up. How the house keeps the physical sample, or any scan of it, is agreed at set-up. Tell GullySystem staff the form your house prefers. They set it up.
How do we reprint with the same colours?
Marketing opens the earlier set-up and books the new lot against it. The colour sequence, repeat length and strike-off carry across. The dye master then confirms that the recipes still match the approved shade. That check is quick.
Does it show how long a set-up takes?
Machine batches record times for each run, so a changeover gap can be read from the batch record itself. Nothing in it is timed. It names what was fitted and the order it was fitted in.
How this feature fits the system.
Textile Processor Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.
Grey receipt and lot booking
Grey cloth is measured and weighed on arrival against the customer’s delivery note, and damage found at the gate is recorded before it is booked.
Goods Receipt (GRN)Lab dip and recipe library
An approved shade carries its dyes, auxiliaries and conditions as a recipe, and the same formula is released for each repeat lot.
Bill of MaterialsMachine batches by lot
The planner groups lots into jet and range batches by shade and weight and sees which machine is free after the current run.
Production PlanningTell us what you need.
Tell us what your team does today, where work gets stuck and what you want to change.
What happens after you share your requirements
- We review your brief and the systems you already use.
- We clarify the workflow, missing information and the work to consider first.
- The proposed scope sets out the deliverables, responsibilities and dependencies.
- Review the scope and commercial terms before deciding whether to proceed.
Start with your requirements
Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.
Share your requirements