Skip to main content
GullySystem

Spares and chemical stock for oilfield crews

Seals, valves, chemical drums and tools are counted by yard and by truck, each with a reorder level. Each issue is charged to a job. Before a crew leaves, the truck’s load is on screen. A trip is not wasted on a missing part, and stores staff see shortages first.

What the stores record holds for each item

An item record is short but exact. It says what the part or chemical is, where it sits and when it needs reordering. Each movement of stock leaves a line behind, so a count can always be explained afterwards by anyone reading it.

Parts, drums and tools

Parts such as seals and valves, drums of chemical and tools are each listed with a description and a unit. Tools are named so a crew knows which kit rides on which truck. Every receipt and issue is kept. Each item has its own history.

Quantity by yard and truck

Stock is counted where it sits. One yard holds a quantity, and each truck holds its own. Anyone asking about a seal sees all of those places at once. No one has to ring round the yards.

Reorder levels for each item for stores spares and chemicals

When a count falls to it, the item joins the list that buyers read. A drum of chemical is reordered before the last one is opened. The level is set per item.

Issues named to a job

Every issue names the job it was used on. The cost follows the job to the well, so a seal change on Well 09 carries the price of that seal. The job is named at issue.

Stock moving between yard, truck and pad

Parts and drums travel a short loop. They arrive at a yard, ride out on a truck and are used at a pad. Four moments along that loop show where the record gets written and who writes each line in it.

Receiving at the yard

A delivery of drums and valves arrives against a purchase order. The storekeeper counts what came and enters it against the yard on the day. Shortages show at once. The order sits beside the count for comparison.

Loading the truck for stores spares and chemicals

Before a swabbing crew leaves, the storekeeper issues the seals and the drum for the job from the yard to the truck. The crew leader reads the truck’s load on a tablet. Nothing is assumed.

Using chemical at the pad

The crew pumps a treatment and records the chemical and quantity on the field ticket. That quantity is drawn from the truck’s stock and charged to the job. The count on the truck drops to match.

Reserving for a service

A planner sets aside the seals for next week’s compressor service. Reserved stock is held back from other jobs. If the yard is short, the buyer sees it before the crew is booked, not on the day.

Who counts, issues and orders the stock

Four groups use the stores record, and each cares about a different end of it, from the yard door to the job cost. Nobody keeps a private list on the side.

Storekeepers and buyers

They receive deliveries, issue parts and chemical to jobs and raise purchase orders when a level is reached. The list of items below reorder level is their daily list. Receipts close the loop on the order.

Planners reserving spares

Maintenance planners check the yard and the truck for the parts a service needs, then reserve them. They plan crews around what is actually held. A wasted trip to a pad is the cost they avoid.

Managers watching consumption

Operations managers read what each job drew from stores and what each well carried as a result. A well that burns through chemical stands out against its neighbours on the same pad. They ask the foreman why.

Accountants charging costs

Finance and joint interest accountants read issues as costs on jobs and wells. The partner statement lines that follow trace back to a ticket, and the ticket traces back to the issue. Each step is traceable.

Decisions to settle before stock is counted

A stores record starts with a physical count, so the decisions are about discipline more than software. Four decisions come first. Settle them with the storekeepers and the foremen before the opening count.

Who may adjust a count for stores spares and chemicals

Decide who may correct a quantity after a recount. A storekeeper may record the difference. A manager may need to approve it. Write the rule, or counts will be fixed quietly and nobody will learn why they drifted.

What stays outside the system for stores spares and chemicals

Bolts, rags and grease tubes may sit in a bin with no record. Seals and valves belong in, as do drums and tools. Say so plainly to avoid arguments at the yard gate.

How opening stock comes across for stores spares and chemicals

Take a physical count by yard and by truck, then enter it from a spreadsheet. The count is the starting point. Old stock sheets may stay filed. Count on a quiet day, when no crew is loading.

The list to read first for stores spares and chemicals

Start with items below reorder level, by yard and by truck, before the crews load up each day. It shows which parts will cause a wasted trip. Reading it each morning builds the habit. That keeps the other counts honest.

How stock links to orders, jobs and servicing

Stores sits between buying and the field. It receives what orders bring in and gives what jobs and services use up. Because of that position, five links decide whether the record stays trustworthy week after week. Each is a hand-off to another feature. They are listed below.

  • Purchase orders deliver parts and drums into the yard
  • Planners reserve spares for scheduled equipment servicing
  • Chemical on a field ticket is drawn from truck stock
  • Issues add part cost to the job and the well
  • Truck loads are read before a service crew leaves

Where stock tracking stops

Stores counts items and charges their use. It does not value stock for the accounts, which stays with your accountant. It does not supply scanners or any other hardware. Handling rules for chemical stay with your safety staff. Supplier prices stay with your buyers. A single truck with a handful of spares may need only a clipboard.

FAQ

Frequently asked questions

Can we see what is on a truck before it leaves?

Yes, it can be seen. Each truck holds its own count, and the crew leader reads it on a tablet. A missing seal or an empty drum shows at the yard, well before the crew reaches the pad.

What happens when an item reaches its reorder level?

It joins the list of items below level that buyers read. The buyer raises a purchase order, and receiving the delivery brings the count back up. Levels are set per item. Your rule says who may change one.

How is the cost of an issued part charged?

The issue names the job. The cost sits on that job and on its well. Your accountants agree which unit price applies during set-up. Costs then appear in lease operating cost per well by job type.

Do we need scanners to count stock?

No hardware comes with the product. Counts and issues are entered by hand on a screen, by the storekeeper or the crew leader. That keeps the set-up simple for small yards with one storekeeper and a couple of trucks.

Can planners reserve parts for a future service?

Yes, ahead of time. A planner reserves spares from stores against a scheduled service. The reserved quantity is held back from other jobs, so the part is there when the crew arrives at the pad.

Where it fits

How this feature fits the system.

Oil and Gas Company Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Wells, pads and facilities

Each well, tank battery and compressor is listed with its equipment, location label and ownership interest, so costs and readings belong to a named asset.

Fixed Asset Register

Field tickets and service jobs

A treatment or workover is raised as a job with its crew, and the signed ticket records hours, equipment and chemical used.

Work Order Management

Equipment and preventive maintenance

Servicing for pumps, compressors and separators is scheduled by run hours or date, and each repair is kept on the machine record.

Asset AMC Tracking
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements