Skip to main content
GullySystem

Explosives, wire and spare stock for quarries

This feature tracks detonators, explosive, diamond wire, drill bits and spares as they are received and issued. Reorder levels are set for the items whose absence stops the face. A drill crew that finds the store empty is the problem it is meant to prevent. That morning never comes.

What the quarry store records for each item

A quarry store holds a few items that matter far more than their price. A saw cannot cut without wire. A rig cannot drill without bits. Every item below is entered once, and then moves in and out by receipt and issue.

Detonators and explosive

Detonators and explosive are listed as stock items. Receipts add to them. Each issue takes from them. The blaster’s issue can be read beside the blast it was charged in, so counts stay close to what is on the shelf.

Diamond wire and drill bits

Diamond wire and drill bits are items with their own balances. Each wire fitted and each bit fitted is an issue. Use is then read against the saw or rig that took them. Nothing is guessed. Nothing is left to memory either.

Spares for rigs, saws and loaders

Spares are kept as items too. Whatever a workshop would hate to run short of goes on the list. The issue names the machine that received the part, so a spare’s history follows the machine.

Reorder level per item for explosives wire and spare stock

Each item carries a reorder level, set for the things that stop the face if they run out. The balance is shown against that level. An item at or under its level stands out on the screen.

From delivery to the saw and the rig

Stores work is short and repeated. Busy faces make it easy to skip. These four moments are where the record is made, from the gate to the saw. Each is a few taps, done by the person who has the item in hand.

Receiving a delivery for explosives wire and spare stock

A supplier’s vehicle arrives with wire and bits. Whoever keeps the store enters what came in, and the balance rises. Whatever is short against the delivery paper is seen while the driver is still at the gate.

Issuing to the blaster

The blaster collects detonators and explosive for a shot. The issue is entered with a name and a time. That is short. Later, the quantity drawn can be set against the charge recorded for the blast.

Fitting a new wire

A cutting crew needs a fresh diamond wire. The store issues it against the saw. The wire change is on the machine record too. Saw history and store stock then tell the same story, and the storekeeper can show it.

Seeing a level reached

A drill bit balance falls to its reorder level. The manager sees it on the screen. An order follows. The face is not stopped because a bit ran out. Nobody had to go and look at the shelf.

Who handles the store and who reads it

Few people should touch the store. More should read it. The roles below show how the work is shared. Putting a name to each task matters here more than on almost any other screen of the product.

For blaster and drill crew

The blaster draws detonators and explosive and the drill crew draws bits. Each draw is entered with a name and a time. Store staff do the typing. The crew returns to the face without queueing at the counter.

For quarry managers

Managers see balances against reorder levels and decide what to buy. They read use per machine and per blast. A saw eating wire fast is noticed in the store. The bill is not left to reveal it.

For the quarry owner

The owner reads whether the face can keep running. Items at their reorder level are listed. There is no need to walk to the store. A purchase can be asked for before a stoppage. Nobody asks after one.

For weighbridge and accounts staff

Accounts staff read what was received. A supplier’s bill can then be checked against a delivery. Payment, tax and supplier terms stay with accounts. The store supplies only the quantities received and issued, nothing about price.

Decisions to settle before stock is counted

Stock records matter for the few items that halt the work. Those need care first. Settle four points with the manager and the store’s keeper. Do it first. GullySystem staff then set up the item list and the levels you choose.

Who may issue and adjust for explosives wire and spare stock

Name who may issue explosive and detonators and who may correct a balance. These items are tightly controlled. A rule on who adjusts a count matters. Settle it with your adviser if local rules apply to your site.

Which items are tracked for explosives wire and spare stock

List the items that stop the face when they run out. Add the rest if the storekeeper can keep up. A short list kept honestly beats a long list left stale. Add items later on request.

Opening balances and reorder levels

Count the shelves on the first day and enter each balance. Then set a reorder level for every critical item. The level is your decision. It rests on how fast the item is used and how long a supplier takes.

The first report to read for explosives wire and spare stock

Choose the list of items at or under their reorder levels. This report prevents a stoppage. Use and receipts by item can be read afterwards, once the first count has settled and the levels have been tested.

How the store connects to blasts and machines

Stock only has meaning where it is used. Explosive meets a blast. Wire meets a saw. A bit meets a rig. The links below show where issues from the store feed other records. Nobody then types the same fact in two places, and the figures agree.

  • Drilling and blasting log shows the charge drawn from stock
  • Machine hours and maintenance records each wire and bit change
  • Haulage, loading and diesel tracks fuel issues in the same way
  • Crews and shifts names the people who drew items that day
  • Bench and face plan shows which face the stock was used on

Where store tracking stops

This record counts what is entered. It does not lock a magazine, check a licence or tell the quarry how much explosive the law lets it hold. Those duties stay with the owner and the adviser. A missed receipt gives a wrong balance until someone counts. A quarry that fires a rare shot can keep a bound book.

FAQ

Frequently asked questions

Can the store show what is about to run out?

A reorder level is set per item. Items at or under their level are listed on the screen. Setting the level is the manager’s call. The list then shows what needs buying before the face is stopped.

Is explosive tracked by the shot?

Issues to the blaster are entered with a name and time. The charge for each blast sits in the blast log. The two can be read side by side. They are separate records, and the manager reconciles them.

Can diamond wire be followed to the saw?

Issues name the saw that received the wire. The machine record also carries the wire change. Reading the two together shows how much wire a saw has consumed. It also shows how frequently the wire was changed.

Does it handle licences and storage rules?

Not at all. Storage, licensing and reporting rules for explosives vary by region and stay with the owner and an adviser. The product keeps quantities received and issued, and nothing is filed with an authority.

Who counts the shelves at the start?

Whoever keeps the store counts, and the manager checks a sample. Those balances are entered as opening stock. Reorder levels are then set from your own experience of use. Staff can adjust them later on request.

Where it fits

How this feature fits the system.

Granite and Stone Quarry Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Block register

Each squared block holds its own number, three measurements, volume and source bench, so a buyer’s query is traced to the face it came from.

Batch and Serial Tracking

Grading and inspection notes

The inspector records the grade, the reason and a photograph against the block, so a disputed grade is reviewed against the notes made that day.

Quality Control

Machine hours and maintenance

Rigs, wire saws, loaders and the crusher each carry hour readings, service intervals, wire and bit changes and breakdown history.

Asset AMC Tracking
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements