Skip to main content
GullySystem

Scrap, Alloy and Refractory Purchase Orders

A melt shop runs on shredded scrap, sponge iron, ferro manganese, graphite electrodes and refractory lining. This feature raises the purchase order for each. Every supplier’s rate sits in one list, so the buyer compares them side by side before anything is approved or sent.

Stores, melt shop and owner share the buying

Buying for a furnace is a shared decision between stores, the melt shop and the owner. The rate list puts each supplier’s figure in front of all three. Nobody approves an order blind.

For stores teams raising the order

The store knows what is running low, so the store raises the purchase order for scrap, sponge iron or electrodes. It picks the supplier from the rate list. Approval is the next step.

For melt shop supervisors stating the need

The supervisor tells stores what planned heats will need, such as ferro manganese or refractory lining, then reads the purchase order that follows. Ordering and furnace stay linked on one record.

For owners and mill heads approving rates

The owner compares quoted rates for the same item from different suppliers before signing off. The comparison sits on one screen. Approval becomes a decision taken with the figures in view.

For the laboratory reading supplier history

The laboratory sees which supplier’s lots were accepted or rejected after the spectro reading. That history sits beside the rate. A cheaper offer can then be weighed against a doubtful lot.

Records behind a scrap or alloy purchase

A purchase order for furnace material carries more than a quantity and a price. It names the material, the supplier, the agreed rate and the expected delivery, and it waits for approval before a truck is sent. It is the first record in the chain.

Material and grade on order

Each purchase line names the material, whether shredded scrap, sponge iron, ferro manganese, graphite electrodes or refractory lining, with the quantity wanted. The same names appear again at the weighbridge. Receipt then matches the order.

Supplier rates in one list

Each supplier’s quoted rate for an item is kept in a single list. The buyer reads the rates for one item together. A new supplier rate is entered on the list. The next order reads it.

Approval and who gave it

Nothing goes out unapproved. The approval and its date are recorded with the order. A later question about who agreed to a rate then has a clear answer on file, not a vague recollection from the buying desk.

Quantity ordered against received

Each purchase line shows the quantity ordered. As trucks are weighed in, the received quantity is set against it. A short delivery is visible against the order and is not discovered at the month end.

Buying for the furnace, shift after shift

The furnace does not wait. It burns through electrodes, lining and alloys whether or not stores kept pace. The buyer works ahead of the heat plan, ringing suppliers for rates and raising orders as the melt shop’s needs become clear.

Stores finds electrodes running short

The storekeeper sees graphite electrodes low and raises an order. Quotes from each supplier sit in the rate list beside the others. A supplier is picked. The order then goes for approval.

A scrap dealer drops the rate

A scrap dealer offers a lower rate than last week’s. It goes into the rate list. Set against the earlier rate from the same dealer, the change is visible before approval.

The melt shop plans a ferro heavy grade

A planned heat needs extra ferro manganese. The supervisor warns stores, and the buyer checks supplier rates for that alloy. It is raised before the heat is due on the furnace.

The owner reviews a refractory order

Refractory lining is a large spend. The owner opens the purchase order with the rates beside it. If one supplier costs more, the owner asks why, then approves the order or sends it back.

Supplier choices to make before the first order

Purchasing rules decide what the rate list holds and who may release an order. Settle them with the owner and the buyer first. They set what every later comparison shows.

Which items share one rate list

Decide whether scrap grades, sponge iron and ferro alloys each get a list or sit in one. Separate lists make comparisons cleaner. A single list is simpler to maintain. Pick one approach for each material family.

Who approves a purchase order

Choose who signs off a purchase, and whether the limit differs between consumables and furnace charge material. The system records the approver’s name. A later query about a rate then has an answer.

How a changed supplier rate is entered

A supplier’s revised rate has to reach the list somehow. Name the person who enters it, and decide whether the earlier rate stays visible for comparison. That history answers later disputes.

What makes a supplier preferred

Decide whether the cheapest rate always wins or whether quality history from the laboratory also counts. The comparison shows rates. Weighing rate against rejections stays a human decision.

Where purchasing stops and accounts begin

This feature raises orders and compares rates. It does not pay a supplier, post a bill to the ledger or negotiate for the mill. Payment terms with suppliers, the tax treatment of a purchase and any contract with a scrap dealer stay with the owner and an adviser. A mill that buys from one supplier on a standing arrangement may find a simple order sheet enough.

From purchase order to weighbridge and furnace

The purchase order is where material enters the plant’s records. It hands to the weighbridge when the truck arrives, and the quantity received is set against it. Accepted lots then reach the charge mix, while rejects return to the supplier’s history. The loop closes in the supplier report.

  • Approved order is read at the weighbridge on arrival
  • Accepted lots flow on to the heat charge mix
  • Rejections count against the supplier’s history
  • Accounting software export carries bill details onward
  • Heat plans tell stores what the furnace will need
FAQ

Frequently asked questions

Can supplier rates for scrap be compared side by side?

Yes. Each supplier’s rate for the same item sits in one list. They are read together before approving. Which rate wins is the buyer’s call and not the system’s. Rates for scrap, sponge iron and alloys all work the same way.

Does it cover refractory lining and electrodes too?

Yes. Graphite electrodes and refractory lining are ordered the same way as scrap and ferro alloys. Each has its own purchase lines. Its rates sit in the list too, ready for the buyer to compare.

Can a purchase order be changed after approval?

That depends on the rule your mill sets. One owner wants the order locked, another lets the buyer amend a quantity. Set the rule during implementation, and our staff configure it. The record then shows which rule applied.

How does a short delivery show up?

On the order, the ordered quantity sits beside the quantity weighed in at the gate. A lighter truck leaves a visible balance. Whether to chase the balance or close the line is the buyer’s decision.

Can rejected lots affect which supplier is chosen?

The receipt records show accepted and rejected lots by supplier. They can be read while comparing rates. A supplier with several rejects is easy to see. The system does not rank or block suppliers by itself. That judgement stays with people.

Where it fits

How this feature fits the system.

Steel Mill Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Enquiries and quotations

Each enquiry becomes a quotation priced from the mill’s rate list by grade and section, with every revision kept beside the original for later comparison.

Estimate/Quotation Management

Sales orders and delivery schedule

A confirmed order carries its delivery window and is split across dispatches, so planners see which orders are late or only part supplied at a glance.

Order Management

Weighbridge and material receipt

Scrap and alloy trucks are weighed in, held in quarantine until the spectro reading arrives, and only then accepted into stock or sent back as rejected.

Goods Receipt (GRN)
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements