Weighbridge and Quarantine Receipt for Mills
Every scrap, sponge iron and alloy truck is weighed in at the weighbridge, and its gross and tare weights are recorded. The lot then waits in quarantine until the spectro reading arrives. Only an accepted lot is released to stock, and a rejected lot never reaches the furnace.
Who stands at the weighbridge and who decides
A truck at the scale is seen by the clerk first, the laboratory next and the melt shop last. All three need the lot’s status. Is it on hold, accepted or rejected?
One truck, one receipt: what stays on file
A truck leaves a short trail. Weights, the supplier, the material and the lot decision are all attached to one receipt. A later question about a load starts from that single entry and not from a hunt through gate diaries.
A scrap truck from gate to furnace yard
One truck rolls in loaded with shredded scrap or sponge iron. The scale and the spectrometer decide what follows. Each person along the route needs the same lot number and the same weight, from the gate to the furnace bay.
Receipt rules to fix before the first truck
The scale and the quarantine rule shape the day for the yard, so settle them first, before the gate opens to the new system. They decide what a receipt means in practice.
Weighbridge matters left to people
The feature records weights and lot status. It does not read the scale by itself unless a file import is set up, and a live link to the indicator is extra work. It does not judge chemistry limits, which belong to the laboratory head. Claims against a supplier, freight charges and customs papers stay with the owner and an adviser. A small yard with very few trucks needs only a slip book.
From the scale to the furnace charge
The receipt takes the approved purchase order in. It hands accepted material to the melt shop. Quantities received close the purchase line, and quality results join the supplier’s history for the buyer’s next decision on which supplier to use. Heat planning reads only stock accepted at the gate.
- Approved purchase order supplies expected material and quantity
- Accepted lots become available for the charge mix
- Rejected lots feed the supplier receipt report
- Lot numbers start the trail used for heat tracing
- Weighbridge file import loads weights without retyping
Frequently asked questions
Can a truck be weighed twice for one lot?
Yes. Gross is taken on arrival and tare after unloading, both against the same lot. Both weights are kept with the receipt. Rejected loads are weighed in the same way.
What stops rejected scrap reaching the furnace?
A lot stays in quarantine until the spectro reading is entered, and a rejected lot is marked as such. Heat planning offers accepted material only. Physical discipline at the yard still matters. The status is visible to the melt shop and to stores.
Does it handle sponge iron and ferro alloys?
Yes. Shredded scrap, sponge iron and ferro alloys each get a receipt, a quarantine status and a spectro reading at the weighbridge. Required fields differ by material. They are set with your laboratory during implementation.
What if the spectro reading is delayed?
The lot simply remains in quarantine. To the melt shop it shows as unavailable, and its weight is already on record against the purchase line. When the reading arrives, the chemist enters it and the status changes.
Can the receipt be matched to the supplier’s bill?
The receipt shows net weight against the purchase order, which gives the buyer a figure to check a bill against. Accounting software export can carry the details onward. The bill itself is handled in your accounts.
How this feature fits the system.
Steel Mill Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.
Enquiries and quotations
Each enquiry becomes a quotation priced from the mill’s rate list by grade and section, with every revision kept beside the original for later comparison.
Estimate/Quotation ManagementSales orders and delivery schedule
A confirmed order carries its delivery window and is split across dispatches, so planners see which orders are late or only part supplied at a glance.
Order ManagementWeighbridge and material receipt
Scrap and alloy trucks are weighed in, held in quarantine until the spectro reading arrives, and only then accepted into stock or sent back as rejected.
Goods Receipt (GRN)Tell us what you need.
Tell us what your team does today, where work gets stuck and what you want to change.
What happens after you share your requirements
- We review your brief and the systems you already use.
- We clarify the workflow, missing information and the work to consider first.
- The proposed scope sets out the deliverables, responsibilities and dependencies.
- Review the scope and commercial terms before deciding whether to proceed.
Start with your requirements
Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.
Share your requirements