Skip to main content
GullySystem

Lab dip and recipe library for dye houses

The lab dip and recipe library keeps every approved shade as a formula. A dip is made, sent to the customer and approved, and its dyes, auxiliaries and conditions are stored with it. Both the dye master and the laboratory work from it, so a repeat lot starts from the record.

A stored shade, field by field

A recipe is the dye master’s knowledge written down where the next person can find it. Each recipe is tied to one shade. Every field below is something a repeat lot would otherwise rediscover by trial, spending dye and machine hours.

Dyes and their quantities

The dyes in the shade are listed in the order they go in, each with its quantity, in the form the dye master already writes. The list reads the same every time. A repeat lot begins from that page.

Auxiliaries and liquor ratio

Salt, alkali, levelling agents and other auxiliaries are stored beside the dyes, together with the liquor ratio. A shade that depends on a particular auxiliary no longer depends on a person who remembers it. The recipe holds it.

Temperature and time conditions

Starting temperature, rate of rise, hold time and cooling are recorded as the dye master sets them. Conditions shape the shade too. They are kept with the formula instead of on a scrap of paper at the bench.

Approval and customer reference

Each recipe shows which dip was approved, on what date, and under which customer reference. When a customer asks for last season’s shade, the laboratory finds the approved dip and its formula together. The approval comes with the formula.

From first dip to a repeat order

A shade begins as a request on a booked lot and ends as a recipe that a later batch can load. Between the two sit the laboratory bench, the customer’s own store and a signature. Reorders then bring it back.

The laboratory cuts the first dip

At the bench, the dye master reads the shade request on the booked lot and cuts a dip, noting dyes and conditions as the trial goes. The trial figures are saved in the working entry. Nothing is final yet.

Marketing sends and chases approval

Marketing sends the dip to the customer and marks it as awaiting approval. The pending list shows which customers have not replied, with the lot waiting on each answer. Silence shows on the list. Nobody has to remember to ask.

The dye master is away

A repeat lot comes in while the dye master is on leave. A laboratory assistant opens the stored recipe and prepares the batch from it. The recipe carries the load. Matching by trial, with dye and machine hours spent, is no longer the fallback.

A reorder after a long gap

One customer reorders a navy last booked some seasons back. Marketing finds the approved dip by customer and shade, with its date and customer reference beside it. The laboratory confirms the formula before release. The dye master decides any change.

Who opens a recipe, and why

A recipe is read at the bench, at the booking desk and on the machine floor, and each reader looks for something different. The laboratory wants conditions. Marketing wants the approval trail. Supervisors want to load the right thing.

For the dye master’s bench

Keeping the library, matching new shades against it and releasing a recipe to the machines all fall to the dye master. Fields follow the house format. Changing a formula after approval is a deliberate act, not a casual edit.

For marketing, chasing approvals

Marketing sees which dips are with customers and which are approved. A customer who calls to ask whether a shade is cleared gets an answer from the list. The list answers it. The customer reference is on screen, so the answer is quick.

For supervisors, loading from the recipe

A machine supervisor opens the released recipe for the batch and loads against its dyes and conditions. Any deviation is recorded against the run, with the reason. The supervisor reads the formula but does not rewrite it. That stays with the laboratory.

For the owner, pending dips

The owner reads dip approvals pending by customer, so a slow approver is visible before cloth waits in the shed for a signature. Idle grey costs shed space and machine planning alike. The pending list puts a name to it.

Recipe habits to agree before the first dip

A library helps only if everyone writes recipes the same way. These points are settled with the dye master before the first formula is entered. The layout is set up once, and the laboratory then lives in it. Habits are hard to move.

Recipe format the dye master writes

Some masters write dyes by weight of cloth, others by grams per litre. Pick the form the laboratory already uses, so the laboratory never converts units while a dip waits on the bench. Conversion invites slips.

Which dip counts as approved

A customer may approve a second or third dip and not the first. Decide whether only the approved dip becomes a recipe, or whether trial dips are also kept for reference by the laboratory. Only one is final.

Amending an approved formula

Decide who may amend a recipe after approval, and whether the earlier wording stays readable. A silent edit changes every repeat lot that follows. That is the risk. Settle with the owner who may touch an approved formula.

Formulas carried over from notebooks

Existing shade cards and notebook entries are keyed in from the dye master’s own records. Decide which customers’ shades go in first. A few live shades keyed well beat a library keyed in a hurry. Start with live shades.

How a recipe reaches the machines

The library sits between booking and batching. It takes the shade request from the booked lot and hands a formula to the machine batch, the store and the inspectors. When a lot fails on shade, the recipe is the first place the cause is looked for, before anyone blames the run.

  • Grey receipt and lot booking supplies the shade request
  • Machine batches by lot loads the released recipe
  • Dyes, chemicals and utilities issues the listed quantities
  • Process route by lot places the dyeing step
  • Inspection, rework and re-dye compares a miss with the recipe

Limits of a recipe library

The library stores formulas and approvals. It does not match a colour, judge a dip or replace the dye master’s eye. Dosing system data can be brought in where the house has set that integration up, but the library does not drive any dispenser. A house with a handful of shades can keep a card file.

FAQ

Frequently asked questions

Can a recipe be reused for another customer?

That is a house decision. Recipes are held against an approved shade for one customer, so using one for another customer is a deliberate copy made by the dye master. The new customer’s approval is recorded on its own.

Does it keep rejected lab dips?

Trial dips can be kept in the working entry for reference. Only the approved dip becomes the recipe a repeat lot loads. That rule is simple. What to keep, and for how long, is agreed with the dye master at set-up.

Can the dosing system read the recipe?

Dosing and dispensing system data is a listed integration. It is scoped in the proposal. Whether recipes pass to a dispenser or dispensed quantities come back is settled with the dye master and the maker of the system.

What is recorded when a customer rejects a dip?

The dip stays marked as not approved. Another is cut. Marketing records the customer’s reason beside it, such as too bright or too dull. The next dip then starts closer to what the customer wants.

How are recipe fields set up for our house?

Dyes, auxiliaries, liquor ratio, temperature and time are set up in the form your dye master uses. GullySystem staff change a field on request, so a new column for a new auxiliary is a small ask. You do not edit the layout yourself.

Where it fits

How this feature fits the system.

Textile Processor Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Grey receipt and lot booking

Grey cloth is measured and weighed on arrival against the customer’s delivery note, and damage found at the gate is recorded before it is booked.

Goods Receipt (GRN)

Lab dip and recipe library

An approved shade carries its dyes, auxiliaries and conditions as a recipe, and the same formula is released for each repeat lot.

Bill of Materials

Machine batches by lot

The planner groups lots into jet and range batches by shade and weight and sees which machine is free after the current run.

Production Planning
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements