Skip to main content
GullySystem

Site Measurement and Quotations for Stone Dealers

Site measurement and quotations turn a visit to a kitchen, a staircase or a floor into a priced quote. Measurements are captured for each piece. Rates apply by area and running length, and edges and cut-outs are added. A revised quote keeps the first version, and acceptance becomes a cutting job.

What a stone quotation records from the site

A quote begins with a tape measure. It ends with a price a customer can sign. Four groups of facts connect the two, and each is kept where the sales team can find it again. Nothing sits on a scrap of paper in a drawer.

Measurements piece by piece

Each kitchen top, stair, floor or cladding wall is measured piece by piece. Length and width go in as taken. Skirting, risers, treads and counter runs each get their own line. The area is worked out from those figures.

Rates by area and length

Flat work is priced by area. Skirting, risers and edge profiles are priced by running length, each against its own rate. Rates follow your rate card, with the rounding your invoices already use. Nobody adds a total from memory.

Edges and cut-outs

Bullnose, ogee and plain polished edges are chosen for each piece, not for the whole job. Hob and sink cut-outs are added with their own charge. Each piece is a separate quotation line. The customer sees what every extra costs.

Versions of the quote

Revision is allowed when the customer moves the sink or changes the stone. The first version stays on file, and the new one is saved beside it. Both are visible if asked. Nothing is overwritten.

Measuring, pricing and revising in the field

Quotation work moves between the showroom desk and the site. Four moments follow. Measurements are taken, priced and changed. The last shows what happens when the customer says yes, and the work moves on to the saw.

Measuring a kitchen

At the site, a sales rep measures the counter runs and notes the hob and sink positions. Keying in can happen on the spot or back at the desk. The chosen slab is named on the quote.

Pricing a staircase

A builder asks for stone stairs. Treads, risers and skirting are measured in turn. Each is priced on its own line by area or running length. The total follows the lines, not a rough sum made at the counter.

Revising after a change

Midweek, the customer wants a deeper sink cut-out and a plainer edge. The rep revises the quote. Version two shows the new charges. Version one stays on file. Only the changed lines move. The rest carry over.

Acceptance becomes a job

On signature, acceptance turns the quote into a cutting job, ready for the saw bay or a workshop. The sizes, edges and cut-outs come across to the job list. The slab chosen at the rack goes with them. Nothing is retyped.

What each person sees on a quotation

Four roles read a quote. One wrote it, one approves it, and two cut and bill it. Each reads a different part. The same quote lines serve all four, so nobody keeps a private copy.

Sales staff and showroom

They find the slab, enter site measurements and quote from the rate card. They see what is free at the racks. Revisions are saved. The earlier version never disappears, so a customer can always ask what changed.

Owners and yard managers

They read quotes by status and see how stone and edges are being priced. A rate that sits below landed cost shows up when margin is read by lot. Questions are put before the customer signs.

Cutting and polishing unit

They receive the cut sizes, edges and cut-outs from the accepted quote. The job list matches the quote line for line. Handwriting stays out of it. Nothing needs translating from a sheet of site notes.

Accounts and dispatch

They see the accepted quote beside the invoice. Pieces and charges can be compared line by line. Differences are easy to find. Dispatch reads the delivery address and the pieces due, so loads are planned from the quote.

Decisions to settle before the first quote

Quotes are only as steady as the rate card behind them. Rates drive everything. Agree the points below with the sales team and the owner. Then the first quote a new hire writes matches the thousandth.

Who changes rates and edges

Rate, edge and cut-out charge changes are made by GullySystem staff when you ask. Decide who in your yard may ask.

What is left out for Site Measurement and Quotations

Decide whether quotes cover only stone and cutting or also fixing and transport. Agree how a job that needs a template visit before measurement is handled. Draw the line early. Write the rule on the set-up sheet.

How existing quotes come across for Site Measurement and Quotations

Quotes still open in a notebook or a file are entered before the first day. Each gets its customer, its pieces and its price. Ask each rep for a list. Old quotes that nobody chases are left out.

Which report matters first for Site Measurement and Quotations

Start with landed cost and margin by lot. It tests the rate card against what the stone cost. Then read stock free and on hold, since a quote names a slab that exists. Check one old quote by hand.

How quotations connect to the rest of the yard

Quotes sit at the front of the flow. They take slabs from stock and holds. They hand accepted work to the cutting unit and the invoice. The same sizes run through all of it, so a measurement is taken once and used four times. Five links do the carrying.

  • Slab and block register supplies slab size, thickness and finish
  • Yard reservations and holds name the slabs a quote uses
  • Cutting and polishing jobs start from the accepted quote
  • Area billing and invoices reuse the quoted lines and rates
  • Builder, interior firm and dealer accounts see quotes for staged supply

Where stone quotations stop short

The quote prices what was measured. It does not take the measurement for you, draw a layout or settle the contract. Payment terms, warranties and anything legal stay with the owner and an adviser. Rates stay your own decision, set by you. A customer who wants one small sill may need only a short note and a price.

FAQ

Frequently asked questions

Can a quote be revised without losing the first?

Yes, a revision is saved as a new version beside the first. The earlier version stays on file with its date and its figures. Both stay readable. You can show them to the customer if they ask what changed.

Are edge and cut-out charges priced per piece?

Yes, every piece is its own quotation line. Its edge profile and any hob or sink cut-out are added to that line, each with its own charge. The customer then reads the cost of every extra clearly.

Can one quote cover kitchen tops and stairs together?

Yes, one quote can hold lines for kitchen tops, stairs, flooring and cladding. Mixed jobs are fine. Each line is priced by area or running length. The total adds the lines in the order they were entered.

Who changes our rate card in the system?

GullySystem staff make rate, edge and cut-out charge changes when you ask. You send the new figures and the date they apply from. Your team then quotes from the new card. The date of each change stays on record.

What happens when the customer accepts a quote?

Acceptance turns the quote into a cutting job. The pieces, sizes, edges and cut-outs move to the job list. The held slab chosen at the rack is attached, so the unit knows what to cut.

Where it fits

How this feature fits the system.

Marble and Granite Dealer Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Slab and block register

Slab 14 of lot 22 stays slab 14. A hold and a delivery both name that piece.

Batch and Serial Tracking

Site measurement and quotations

Kitchen top measurements become a quote with edges and a sink cut-out. Acceptance makes it a job.

Estimate/Quotation Management

Cutting and polishing jobs

The job lists the slab, the cuts and the polishing unit. It closes with pieces back and wastage.

Work Order Management
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements