Skip to main content
GullySystem

Slab Holds and Yard Reservations for Stone Dealers

Yard reservations and holds stop one slab being promised twice. A rep places a hold on the pieces a customer chose at the rack, for a named customer and until a set date. Other staff see those slabs as taken. When the date passes, the slab returns to free stock and appears on a follow-up list.

What a stone hold writes down at the rack

A hold is a short record, made while the customer is still standing at the A-frame. It replaces the promise that used to live in one rep’s head. Four facts matter. Reps type them while the buyer waits at the rack.

The slab or slabs chosen

Each slab on a hold is named by its number, so a customer’s choice is one specific piece and never just a shade. A kitchen top may need three slabs from the same lot. All three are listed on the same hold.

The named customer

Each hold names its customer. A walk-in buyer, a builder’s site engineer and an interior designer each appear under their own name. A colleague who sees the slab as taken knows exactly whom to ask about it.

The expiry date

Every hold has an expiry date. Whoever places the hold sets it, and that date is the promise the yard is making. Nothing stays reserved forever, so the racks do not fill with stone nobody is buying.

The rep and the release note

Each hold shows which sales rep placed it. When the date passes, the slab goes back to free stock with a note saying why. Anyone opening the record later can read that note. The note stays.

Holds across a busy week in the yard

Holds matter at three points. One is the rack, when stone is chosen. Another is the counter, when a second buyer asks. The last is the morning, when lapsed holds come back. Here is how each plays out in a marble or granite yard.

A customer taps the pieces

A customer walks the racks and picks two slabs for a bathroom wall. The rep places the hold there and then, with the buyer’s name and a date. The slab shows as taken from that moment.

A colleague gets the same enquiry

Another rep is asked for the same shade later that day. The search shows the slab as taken, and by whom. The second buyer is offered a free piece of similar tone instead. No promise is broken.

The follow-up list at opening

Holds that lapsed since the last working day sit on the daily follow-up list. Reps work down it, calling each customer. Some extend the date. Others release the slab, and it goes back on offer.

A hold becomes a job

The customer accepts the quote, and the quote becomes a cutting job. The slabs leave free stock for good, and the job lists them by number beside the cut sizes. The hold has done its work.

What each person sees on a held slab

Holds touch the showroom, the owner, the cutting unit and the accounts desk. Each looks at the same slab record. Each reads a different line from it. One slab number ties all four together.

Sales staff and showroom

They place holds, extend dates and release slabs. They see what is free at the racks and what colleagues have taken. Their own list shows holds expiring soon, with the nearest date first, so no customer is forgotten.

Owners and yard managers

They read holds by sales rep and watch the count of slabs on hold. Any rep with a great number of slabs held and no sales is easy to notice. Releases are the owner’s call.

Cutting and polishing unit

Each job lists its slab by number and shows who it is held for on the job list. A slab promised to one buyer is not cut for another. The floor never guesses. Nobody rings the showroom to check.

Accounts and dispatch

Quote to invoice, they read the hold again. Slab numbers on the hold match those on the delivery note. A mismatch is spotted before the vehicle leaves. Dispatch plans loads from the slabs listed on the invoice.

Decisions to settle before the first hold

Holds are only as fair as the rules around them. Agree these points with the sales team and the owner. Write them on the wall by the racks. Then every rep treats a customer the same way.

Who may extend or cancel

Decide whether a rep can extend their own hold or must ask the yard manager. Settle who may cancel a colleague’s hold. Whatever you choose, the change is recorded against the person who made it.

What is left out for yard reservations and holds

Decide whether offcuts and small pieces can be held at all. Agree how a hold on half of a bookmatched pair is treated. Pairs are linked, so the rule should say whether the mirror is held too. Keep exceptions few.

How existing promises come across

Promises written in a notebook or remembered by a rep are entered before the first day of use. Each gets a customer, a slab number and an expiry date. Anything without a date is chased first.

Which report matters first for yard reservations and holds

Begin with holds expiring in the coming days, by sales rep. Reps will open it each morning. Stock free and on hold comes second, once the first list is trusted. It stops a promised slab being sold again at the racks.

How holds connect to quotes, cutting and stock

Stock feeds each hold, and each hold writes back to stock. The same slab number then runs through the quote, the cutting job and the invoice. It is the link between the first talk at the rack and the paper that follows. Five other features meet it.

  • Slab and block register shows which slabs are free
  • Lots, shades and grading warns when a mirror slab exists
  • Site measurement and quotations start from the held slabs
  • Cutting and polishing jobs take the held slab to the saw
  • Area billing and invoices name the slabs that were held

Where yard holds stop

A hold is a record, not a contract. It takes no money and sends no message to the customer on its own. Deposits, cancellation terms and anything legal stay with the owner and an adviser. A very small yard with few slabs may manage with a whiteboard at the racks.

FAQ

Frequently asked questions

Can one hold cover several slabs for one job?

Yes, a hold can list every slab chosen for a customer. A run of stair treads or a long counter may need several pieces from one lot. Each piece is named. All are released together on expiry.

What do other staff see on a held slab?

They see the slab marked as taken, with the customer’s name, the rep and the date. Nobody needs to ask around the yard. A buyer is offered another piece before the first is promised again.

Where do lapsed holds show up each day?

Lapsed holds release themselves and land on a daily follow-up list. Nothing needs cancelling by hand. First thing, a rep opens the list, sees which customers need a call and decides whether to extend or let each slab go.

How do I see which holds a rep owns?

Open the report of holds expiring in the coming days, grouped by sales rep. Each rep’s slabs, customers and dates sit together. An owner can read it at the morning stand-up before the doors open. It is a short list.

Will the customer be told when a hold lapses?

The follow-up list is for your staff. Your rep decides whether to call, send a message through a connected tool or let the slab go. The record keeps a note of what was done and when.

Where it fits

How this feature fits the system.

Marble and Granite Dealer Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Slab and block register

Slab 14 of lot 22 stays slab 14. A hold and a delivery both name that piece.

Batch and Serial Tracking

Site measurement and quotations

Kitchen top measurements become a quote with edges and a sink cut-out. Acceptance makes it a job.

Estimate/Quotation Management

Cutting and polishing jobs

The job lists the slab, the cuts and the polishing unit. It closes with pieces back and wastage.

Work Order Management
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements