Retail · Marble and Granite Dealer Management SoftwareSlab stock by lot and shade, yard reservations, cutting jobs, deliveries and builder accounts in one place.
Every slab is its own record, with lot, shade, thickness, veining notes and any fissure or resin patch marked. Customers walk the A-frame racks and pick pieces. The hold is written down at once. Bridge saw and polishing work goes to your own bay or an outside workshop, and the kerf loss comes back counted. Quotes follow area, edges and cut-outs.
- Slab, block and lot fields set up to match how your yard names shades and finishes
- Existing stock sheets and builder balances entered before the first day of use
- Rate, edge and cut-out charge changes made by GullySystem staff when you ask
Marble and Granite Dealer Management Software from GullySystem is for yards that buy stone by container, truck or block and sell it as slabs, bookmatched sets and cut pieces. Each slab is a separate record. A customer’s choice is therefore one specific piece, and holds, cutting jobs, breakage and builder accounts all point back to it.
What goes wrong before the software.
How the work flows through it, step by step.
- 1
Purchase and receipt
A container or truck arrives against a purchase order. Each slab is measured with a caliper and tagged with lot and shade. Cracks and epoxy repairs are noted before shelving.
- 2
Yard selection
A customer walks the racks and taps the pieces. Each hold is placed with a date. Others see that slab as taken.
- 3
Quotation
Site measurements go in, with skirting, risers, treads and counter runs. Rates apply by area. Edges and cut-outs are added. Acceptance turns the quote into a job.
- 4
Cut and polish
The slab goes to the bridge saw or to an outside workshop with a cut list. On return, finished pieces, offcuts and kerf loss are recorded.
- 5
Delivery
Pieces are loaded on A-frames and crates, then go out with a delivery note. The site checks each piece. Transit breakage is logged with photos.
- 6
Invoice and collection
The invoice follows the area supplied. Receipts post to the account. A statement chases the balance.
What is inside.
Every module can be switched on, left out or changed to match how your team already works.
The business modules it is built from.
Each one is also available on its own, or inside a system built for you.
- Batch and Serial Tracking
Slab 14 of lot 22 stays slab 14. A hold and a delivery both name that piece.
- Estimate/Quotation Management
Kitchen top measurements become a quote with edges and a sink cut-out. Acceptance makes it a job.
- Work Order Management
The job lists the slab, the cuts and the polishing unit. It closes with pieces back and wastage.
- Purchase Order Management
A container order is received slab by slab. Cracked pieces are noted against the lot.
- Credit Limits and Control
A builder past credit terms is flagged. The next staged load waits for a decision.
- Invoice Management
One invoice shows square feet, edge lengths and part payments. Tax lines sit beneath.
How we would put it in.
Setup, data migration, integrations and anything built on top.
Explore moreBrowse business and AI solutions
Looking for another part of your workflow? Browse the modules by business function.
- Applicant Tracking (5)
- CRM (8)
- Finance & Accounting (10)
- Helpdesk (4)
- Human Resources (13)
- Inventory Management (5)
- Project Management (7)
- Manufacturing (6)
- Procurement (4)
- Sales and Distribution (6)
- Field Service (5)
- Statutory and Compliance (4)
- Retail and POS (4)
- Bookings and Appointments (3)
- Subscriptions (2)
- Assets and Fleet (4)
- Platform (6)
- Analytics (2)
- Documents (1)
- All business solutions
One system, each person sees their part.
For owners and yard managers
See stock by lot and shade, capital sitting in uncut stone, holds about to lapse and balances owed.
For sales staff and the showroom
Find a slab by shade or size, place a hold and quote from site measurements. See what is free at the racks.
For the cutting and polishing unit
Get a job list with cut sizes and edges. Record finished pieces. Report offcuts and kerf loss.
For purchase and import staff
Raise orders, receive containers slab by slab, record cracks and keep landed cost against each lot.
For accounts and dispatch
Issue invoices by area, post receipts, send builder statements and plan the day’s loads.
The numbers the owner asks for.
- Stock by lot, shade and thickness with slabs free and on hold
- Holds expiring in the coming days by sales rep
- Cutting jobs open by workshop with wastage on completed jobs
- Offcut stock available for small orders
- Breakage by lot, supplier and carrier
- Landed cost and margin by lot
- Builder and dealer balances with age of dues
Who this is built for.
- Marble dealers who import slabs and sell them in the yard
- Granite dealers who buy from quarries and cut to order
- Yards that sell both slabs and finished kitchen tops, steps and flooring
- Dealers who send polishing work to outside workshops
- Stone traders who supply builders in stages against site schedules
- Owners with a main yard and a second godown or showroom
When it is not the right choice.
- The granite and stone quarry product suits operators who extract the stone, run the quarry and weighbridge and sell blocks from the pit.
- A tile showroom that sells only boxed tiles and sanitaryware with no slabs needs the tile and sanitaryware showroom product.
Adapted to your business before it goes live.
You are not handed a login and left to it. The product is set up around your records, your people and the tools you already use.
Works alongside
- Accounting package export
- SMS
- Barcode or tag label printer
- Transport document data through your provider
Questions to settle before choosing the system.
Review these scenarios against the product configuration and record anything that still needs to be agreed.
Area billing and invoices
Can you explain the balance from its original documents?
Select a partly settled example in “Area billing and invoices”. Ask for the invoice, allocated receipts and remaining balance to be shown together before agreeing the opening figures.
Background reading: ERPNext: outstanding invoices
Site measurement and quotations
Do purchasing, operating and billing quantities use the same unit?
Check the measurement unit and rounding used in “Site measurement and quotations”. Compare the result with a known sample before accepting a converted quantity or calculated charge.
Background reading: ERPNext: units of measure
Questions owners ask before a demo.
Is every slab tracked, or only the lot?
Every slab. A lot is the group it arrived in, but each piece has its own number, size, finish and defects. Each hold points to one slab.
Can a block be turned into slabs in the system?
Yes. The block is recorded on arrival. After the gangsaw, it splits into slabs. Cost passes to each slab by a rule you choose.
How does it handle wastage on cutting jobs?
A job records the slab sent and the pieces returned. The difference splits into offcut kept for stock and kerf or waste. Both show on the job and in the workshop view.
Can we hold slabs for a customer?
Yes. A hold carries a customer, a date and a sales rep. Other staff see the slab as taken. When the date passes, it returns to free stock with a note.
Does it work with outside polishing units?
Yes. Slabs sent out are listed against the workshop with its charge and payment due. You see what it holds and what is overdue.
Are tax invoices produced?
Yes. Invoices carry the tax rules you enter for stone, cutting work and transport. Your accountant confirms which rates apply.
What happens if the internet drops in the yard?
Screens need a connection. A printed hold and stock list works as a daily fallback. Paper entries are keyed in once the line returns.
How is a stone dealer system priced?
Yards and users, whether cutting jobs and workshop accounts are in the first release, how many slabs are entered at the start and which tools connect. Each piece is a separate quotation line.
How long does the team take to learn it?
Rack staff learn lookup and holds first, which is brief. Cutting jobs and billing take a little longer. We run sessions with each group.
What will the stone dealer software not do?
It does not run saws or design layouts. Layout files from a nesting program can be attached to a job, but that program stays with your workshop.
Wondering what it would cost? Share your requirements and an engineer will come back with a scope.
Every part, on its own page.
Each page covers one part of the system: what it records, who uses it and what it hands on.
- Slab and Block Register for Stone Yards
- Lots, Shades and Grading in a Stone Yard
- Slab Holds and Yard Reservations for Stone Dealers
- Import and Quarry Purchase Orders for Stone Yards
- Cutting and Polishing Jobs in a Stone Yard
- Outside Workshop Accounts for Stone Dealers
- Site Measurement and Quotations for Stone Dealers
- Area Billing and Invoices for Stone Dealers
- Delivery and Breakage Records for Stone Dealers
- Builder and Dealer Accounts for Stone Suppliers
Built for.
The trades this product is set up for. Pick yours to see how the work runs there.
See Marble and Granite Dealer Management Software set up around your records.
Tell us how you run things today. An engineer reads it and writes back with what fits as it is, what would need changing, and what we would start with.
What happens after you share your requirements
- We review your brief and the systems you already use.
- We clarify the workflow, missing information and the work to consider first.
- The proposed scope sets out the deliverables, responsibilities and dependencies.
- Review the scope and commercial terms before deciding whether to proceed.
Start with your requirements
Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.
Share your requirements