Skip to main content
GullySystem

Quality Tests and Mill Test Certificates

The laboratory records chemistry, yield strength, tensile strength, elongation, rebend and bend tests and weight per metre against each heat. A mill test certificate then prints in the layout each customer or third party inspector expects, and nobody retypes a figure from a lab sheet.

Who tests the steel and who signs for it

The certificate reaches the buyer with the steel. Behind it stand the chemist, the quality head and the sales desk. Each touches different fields of the same test record on the heat.

For the laboratory entering spectro and tensile results

The chemist enters carbon, manganese and sulphur from the spectrometer, and yield and tensile figures from the universal tensile machine. The values are keyed once, against the heat.

For the quality head releasing or holding lots

The quality head reads the results against the grade’s limits and releases or holds a lot from the same screen as the figures. Unreleased lots get no certificate at all.

For the sales desk answering certificate requests

A buyer asks for the certificate of a delivered bundle. The desk prints it in that customer’s layout from the heat record. The laboratory is not disturbed for a copy.

For owners and mill heads reading test failures

The report of test results and rejections by heat shows where tests fail, by grade and by lot. The head asks the melt shop why. Heat numbers back the question.

Test record and certificate, field by field

A test record holds the laboratory’s evidence for one heat. The certificate shows it in the buyer’s format. The same values sit behind both, so the printed page and the lab result cannot disagree, whatever the layout or the customer.

Chemistry from the spectro reading

Elements such as carbon, manganese and sulphur are recorded against the heat. The limits for the grade sit beside them. A figure outside limits is plain. The ladle sample’s figures are the ones that print.

Mechanical tests on bar samples

Yield strength, tensile strength and elongation come from the bar sample. Bend and rebend tests are recorded as pass or fail with their detail. Each sample belongs to a heat. Results are kept as figures and not as scanned sheets.

Weight per metre check

The weight per metre of a section is measured on the sample bars, recorded and set against what the customer’s order expects. A light bar shows in the record. That happens before the certificate is printed.

Customer certificate layouts

Each customer or inspector has its own layout, built from the test fields the laboratory records. The grade’s standard is confirmed by your quality team. The layout prints those fields and no others. A third party inspector’s form is built the same way.

A heat’s test results, bar to certificate

Testing begins at the furnace. A ladle sample is taken there for the spectro reading. It ends at the gate, where a certificate travels with the trailer. Between the two, the laboratory’s figures move through release and print, and nothing is retyped.

The ladle sample reaches the spectrometer

At the spectrometer the chemist reads the sample and enters the chemistry against the heat number. A heat awaiting its result is visible. The melt shop and the sales desk both see it, so nobody guesses.

A bar sample goes to the tensile machine

After rolling, a bar sample is tested. The chemist enters yield, tensile, elongation, rebend and bend results against the heat. Every figure is entered once, by the person who ran the test.

The quality head decides on a lot

Next the quality head reads the results and releases the lot or holds it. A held lot stays off the certificate list. The decision is made on the same screen as the figures.

The certificate is printed for the trailer

At dispatch the gate desk prints the certificate in the buyer’s layout and attaches it to the tax invoice that goes with the load. An inspector gets the layout asked for.

Test limits and layouts to confirm with quality

Test fields and layouts are what your customers see. Settle them with the quality head before go-live. The lab sheets in use today are the starting point for every grade.

Which test fields each grade requires

Each grade needs its own chemistry limits, bend radii and tensile fields. The lab sheets are handed over by the quality head. The fields are entered from them first.

Which layout each customer receives

Decide which customers get a layout of their own and which can share one. An inspector may bring a form. What each requires is confirmed by the quality team.

Who may release a borderline result

A result near its limit forces a judgement. Decide whether the chemist or only the quality head may release such a lot. The system records who released it, and when.

How retests appear on a certificate

A failed sample may be tested again. Decide how a retest is recorded, and whether the first result stays visible. Which result a certificate prints is for the quality head and the applicable standard.

What the laboratory record cannot decide

The feature stores test results and prints the certificate. It does not set limits, interpret a standard or certify the steel. Those judgements stay with the quality head, the buyer’s inspector and, where needed, an adviser. It reads no machine directly. Every figure is typed or imported. A trader reselling certified steel may only need to file the supplier’s certificates.

Test results travel with the heat number

Test results hang on the heat number. They arrive from the melt shop’s heat record and the rolling run’s samples, and they leave on the certificate that travels with the dispatch. The release decision gates what goes forward, so a held lot never reaches a certificate or an invoice.

  • Heat number links results to charge and tap records
  • Bar samples come from the rolling run’s output
  • Release or hold decides which lots go forward
  • Certificate prints at dispatch beside the gate pass
  • Invoice carries the certificate for the delivered heat
FAQ

Frequently asked questions

Can one heat have different certificate layouts?

Yes. The test fields come from the heat. The layout is chosen by the customer. Two buyers of the same heat can each receive their own format, built during implementation from the fields your laboratory records.

Are test fields fixed for every grade?

No. Grades, chemistry limits, bend radii and tensile fields are set up from your lab sheets. Our staff change them on request. That applies when a grade or a standard moves, or when a customer adds a test.

Who confirms the standard a certificate follows?

Your quality team does. We build the layout from the fields your laboratory records. The standard that applies to each grade is confirmed by your people, and by the buyer’s inspector where one is involved. We never decide it.

Can a held lot still have its results viewed?

Yes. The results stay on the heat. A held lot simply goes no further. The quality head can read them, and release or reject the lot after review. Nobody has to hunt for the lab sheet.

Does it print a certificate for every bundle?

Certificates are printed per heat or lot. Each customer decides what it needs. What it lists, from the heat number to each test, is set by the layout. Which bundles it covers is set with your quality and dispatch teams.

Where it fits

How this feature fits the system.

Steel Mill Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Enquiries and quotations

Each enquiry becomes a quotation priced from the mill’s rate list by grade and section, with every revision kept beside the original for later comparison.

Estimate/Quotation Management

Sales orders and delivery schedule

A confirmed order carries its delivery window and is split across dispatches, so planners see which orders are late or only part supplied at a glance.

Order Management

Weighbridge and material receipt

Scrap and alloy trucks are weighed in, held in quarantine until the spectro reading arrives, and only then accepted into stock or sent back as rejected.

Goods Receipt (GRN)
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements