Numbered block register for stone quarries
The block register gives every squared block its own number and keeps its length, width, height, computed volume, colour and source bench. The cutter’s crew is noted at the same entry. Buyers pick from this list. No block depends on paint on the stone any longer.
What each block row keeps in the register
Each squared block is one row. The row is made when the block is cut. It stays with the stone until it leaves. Whatever a buyer’s agent, an inspector or the accounts office asks about a block is answered from this row.
A block from cutting to the buyer’s trailer
A squared block passes through several hands before it leaves the gate. Each adds one fact to the same row. Follow one block through a working week and the register fills in, without anyone writing a second list on a separate sheet.
Who opens the block register and why
Four of the five product roles open the register in a normal week. Their purposes differ. Each opens the same row. Here is what each person looks for when the block list is on the screen.
Decisions to settle before blocks are numbered
Block numbers are hard to change once they are painted on stone and quoted to buyers. Settle the four points below with the yard supervisor before the first row is made. GullySystem staff then set the register to match.
How the block register connects to other records
Here the product turns on one record. Blasts and benches feed it from one side. Grading, bays, orders and invoices read from it on the other. If a number is wrong here, every later record repeats the mistake, which is why the links below matter.
- Bench and face plan supplies the source bench for each row
- Grading and inspection notes add the grade, reason and photograph
- Yard bays and crushed stone stock shows where each block lies
- Buyer orders and dispatch picks blocks by number for a trailer
- Invoices and receipts bills the dispatched blocks to the buyer
Where the block register stops
This record describes a block. It does not cut one, price one or decide that the stone is sound. Measuring stays a task for the yard, and the figures are only as good as the tape or gauge used. Pricing, buyer terms and tax questions stay with the owner and the accountant. A small yard with a handful of blocks can paint numbers and keep a notebook.
Frequently asked questions
Can our own numbering system be used?
The numbering your yard paints on stone goes in first. Screen and stone then read alike. Staff set it up with the prefix and the running count your yard uses.
Is the volume typed in or worked out?
Volume is worked out for you. You enter length, width and height, and the figure follows. That removes a column of sums from the yard and from the office. A wrong tape reading still gives a wrong figure, so measure with care.
Can a buyer’s agent search the list by colour?
Each row holds a colour, so a filter by colour and size lists matching blocks. The supervisor reads the numbers and bays aloud. The agent chooses without walking the rows of the yard, and the choice is saved for the order.
What happens when a block is sold?
A buyer picks it by number on an order, and it is weighed out on a trailer and shown on the delivery note. The block is then marked dispatched. Its history stays for later queries.
Can an old paper register be loaded?
Spreadsheet sheets and notebooks are keyed in or scanned before go-live. A supervisor checks sample numbers against the yard. Mistakes found there are fixed first. Then the quarry starts on the new list, with the paper books kept as a backup.
How this feature fits the system.
Granite and Stone Quarry Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.
Block register
Each squared block holds its own number, three measurements, volume and source bench, so a buyer’s query is traced to the face it came from.
Batch and Serial TrackingGrading and inspection notes
The inspector records the grade, the reason and a photograph against the block, so a disputed grade is reviewed against the notes made that day.
Quality ControlMachine hours and maintenance
Rigs, wire saws, loaders and the crusher each carry hour readings, service intervals, wire and bit changes and breakdown history.
Asset AMC TrackingTell us what you need.
Tell us what your team does today, where work gets stuck and what you want to change.
What happens after you share your requirements
- We review your brief and the systems you already use.
- We clarify the workflow, missing information and the work to consider first.
- The proposed scope sets out the deliverables, responsibilities and dependencies.
- Review the scope and commercial terms before deciding whether to proceed.
Start with your requirements
Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.
Share your requirements