Link every stock shape, grade certificate and machined part to the job it served.

Engineering plastics are bought by grade, and the grade matters. A bush in the wrong nylon, or a seal in a filled PTFE when virgin was asked for, can look identical on the bench and fail in service.

Management software for engineering plastics processors keeps the grade, the certificate and the offcut with the job. Tell us which nylon, acetal and PEEK grades you cut, in what rod, sheet and tube sizes, and the job records follow those machining routings.

A maintenance buyer or an equipment maker asks for gears, bushes, wear strips, insulators or seals, with a drawing and a grade such as nylon, acetal, PTFE or PEEK. You price from the stock shape needed, whether rod, sheet or tube, the machining time and the offcut that will be left. Material arrives with a certificate naming grade and lot, and that paper must stay joined to every blank cut from the bar, or the trail is gone.

The shop cuts blanks, turns and mills them on CNC machines, and sometimes anneals the part to relieve stress. Plastic keeps moving after it leaves the machine. Dimensions are measured once the part has settled. Offcuts return to a rack. Some jobs move to a mould for volume, with technical grades dried before use. Finished parts are bagged, labelled and shipped.